SANOXY Cat6A 14FT Shielded STP Network Ethernet Cable
A 14‑foot Cat6A shielded patch cable supporting 10 Gbps at 500 MHz with 26 AWG pure copper conductors, 50‑micron gold‑plated RJ45 connectors and a non‑booted design for dense installations
- 10 Gbps speed for fast streaming and gaming
- 500 MHz bandwidth handles heavy data loads
- Shielded STP design cuts interference in busy setups
- 26 AWG pure copper conductors keep signals clean
- 50 micron gold contacts resist corrosion for lasting links
Shielded Cat6A Patch Cord
This SANOXY Cat6A cable provides a 14FT shielded STP connection rated for 10Gbps and 500MHz bandwidth. It uses 26AWG pure copper conductors and 50-micron gold-plated RJ45 contacts. The non-booted design suits high-density patch panels and switches.
For Dense Rack Installations
The non-booted plugs fit tightly spaced ports on patch panels and switches where booted connectors would not seat. Buyers who need strain-relief boots for frequent unplugging or who require longer runs beyond 14FT should consider other options.
Simple Press-Fit Installation
Push each RJ45 connector into the port until it clicks; the shielded jacket is flexible for routing through cable managers. The only common issue is accidentally depressing the release tab while routing, which can unseat the plug.
How it compares
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 9,945 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SANOXY Cat6A network ethernet cable 10FT STP 26AWG 500MHz 10Gbps 50-micron gold 45 non-booted Black
SANOXY Cat6A Ethernet Cable 10FT Blue 26AWG Shielded STP 10Gbps 500MHz Gold 50 Micron Non-Booted RJ45
SANOXY Cat6A Ethernet Cable 14 ft Shielded STP 10Gbps 500MHz 26AWG Gold RJ45 Blue
SANOXY Cat6A Ethernet Cable 15FT Shielded STP 10Gbps 500MHz 26AWG Gold RJ45 Non-Booted Black
Questions about this item
What RJ45 port speed is needed to use the 10 Gbps rating of this Cat6A cable?
A 10GBASE-T port is required; a 1 Gbps port will limit the link to 1 Gbps even though the cable supports 10 Gbps at 500 MHz.
Will the shielded STP construction cause any issues when running this 14 ft cable next to older unshielded Cat5e patch cords?
No, the foil and braid shielding only protects this cable's own pairs from interference; it does not affect adjacent unshielded cables.
How can I confirm the link is running at 10 Gbps after plugging in the gold-plated RJ45 connectors?
Check the switch or NIC status LEDs and the OS network adapter speed readout — both should show 10 Gbps full duplex.
More in Ethernet & LAN Cables
Similar items
Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
Intellinet Cat8.1 U/FTP Slim Patch Cable 3 ft Black 10-Pack 40G 2000 MHz 30 AWG
- RJ45
- RJ45
Nippon Labs 60CAT6A-6WT Cat6A network ethernet cable 6 ft white 24 AWG
- 6A
- RJ45
Intellinet Network Solutions Cat6 U/UTP Slim Ethernet Cable 7 ft Green 10-Pack 30 AWG
- RJ45
- RJ45
Nippon Labs 60CAT8-3-24YW Cat8 network ethernet cable 3 ft yellow 24 AWG 2000 MHz 40 Gbps
- RJ45
- RJ45
Intellinet Cat6 U/UTP Slim Ethernet Cable 7 ft White 10-Pack 30 AWG Stranded
- RJ45
- RJ45










