We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black shielded Cat6A patch cable with non-booted gold RJ45 connectors

SANOXY

SANOXY Cat6A Shielded STP Network Ethernet Cable 7FT 10Gbps 500MHz 26AWG Non-Booted Gold 50µm Black

SKU CH-F4Z5-V4C65

Shielded Cat6A patch cord supports 10Gbps at 500MHz with 26AWG pure copper and 50µm gold RJ45 contacts in a space-saving non-booted design

Length 7 ft.

Show 3 more
  • 7 ft length fits tight patch-panel runs
  • 10 Gbps and 500 MHz bandwidth for high-speed data
  • Shielded STP construction reduces electromagnetic interference
  • 26 AWG pure copper conductors ensure reliable signal quality
  • 50 µm gold-plated contacts resist corrosion for stable connections

Ultra-Short 7FT Patch Cable

This 7FT Cat6A shielded STP cable is built for close-range links between patch panels, switches and side-by-side equipment in dense racks. It supports 10Gbps speed and 500MHz bandwidth for low-latency streaming, gaming and cloud workloads. Pure bare copper 26AWG conductors and 50-micron gold-plated RJ45 contacts deliver stable, long-term signal quality. The non-booted design saves space in high-density installations.

Simple Plug-In Installation

The non-booted RJ45 connectors slide into ports without a release tab, making insertion and removal fast in tight cabinets. Shielded STP construction reduces electromagnetic interference and crosstalk when cables run alongside power leads or other data lines. Stranded 26AWG conductors stay flexible for routing but can kink if bent sharply around corners. Ensure the latch clicks fully to avoid intermittent contact.

Verify Port Spacing And Shielding Needs

Confirm the 7FT length reaches between your specific devices without tension or excess slack in the rack. Check that both ends use standard RJ45 ports compatible with non-booted plugs. The shielded design requires grounded equipment at each end to realise the full interference-reduction benefit. Buyers needing longer runs or booted connectors for strain relief should choose a different cable.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 70% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the cable is delivering the rated 10Gbps speed after connecting it?

Run a network speed test between two 10Gbps-capable devices; a result near the rated throughput and stable 500MHz bandwidth indicates the shielded STP link is performing as specified.

What comes in the package and is anything else required for a standard patch-panel installation?

The box contains the 7FT Cat6A shielded STP patch cord with non-booted RJ45 connectors on both ends; no extra components are needed for a typical patch-panel or switch connection.

Which length and shielding choice suits a high-density rack with side-by-side switches?

The 7FT non-booted STP version is built for tight, close-range runs where space is limited and electromagnetic interference from adjacent equipment must be minimised.

More in Ethernet & LAN Cables

Similar items