We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow SATA III cable straight to right angle 31 inch

SATACables

SATACables 30SR787YL SATA III Cable 31in Straight to Right Angle Yellow

SKU CH-9F01-D188C

A 31-inch yellow SATA III cable with straight and right-angle connectors supports 6.0 Gbps throughput and backwards compatibility

  • Product colorYellow
  • Overall length31 in - 35 in
  • SATA III revision 3.0 delivers up to 6.0 Gbps throughput
  • Straight-to-right-angle connectors fit tight spaces inside the case
  • Yellow 31-inch length simplifies cable routing and identification
  • Shielded construction protects signals from EMI and RFI interference
  • Narrow cable design improves internal airflow for cooler operation

Straight-to-right-angle SATA cable

The SATACables 30SR787YL is a SATA III internal cable with a straight connector on one end and a right-angle connector on the other. It links a motherboard host port to a Serial ATA hard drive, optical drive or other SATA device. The yellow jacket measures between 31 and 35 inches and uses a narrow profile to improve airflow inside the case.

Upgrade from older SATA cables

This cable replaces SATA I or SATA II interconnects that limit throughput to 1.5 or 3.0 Gbps. The jump is worth it when a solid-state drive or modern hard drive can saturate the 6.0 Gbps ceiling of the SATA 3.0 specification. Builders still using first- or second-generation cables on 6 Gbps ports will see the full device speed only after swapping to this revision 3.0 link.

Fits standard SATA ports with locking latches

Both connectors carry the SATA III locking latch so the link stays seated during transport or vibration. The right-angle plug eases routing behind drive cages or along motherboard edges where a straight plug would press against the case wall. No extra adapters or power connections are required beyond the standard SATA data and power headers already present on the board and drive.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $1.99
Cheaper than about 97% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Model name30SR787YL
Product colorYellow
Size & build
Overall length31 in - 35 in

Questions about this item

How much clearance does the right-angle SATA connector need behind a 3.5-inch drive bay?

The right-angle plug sits flush against the drive's SATA port, so you only need the depth of the connector itself — roughly the width of the port — behind the drive for the cable to route cleanly.

Which side of the locking latch engages first when plugging the straight end into a motherboard port?

Insert the straight connector squarely until both sides of the latch click simultaneously; pushing one corner first can leave the opposite latch unseated and cause intermittent detection.

When should the cable be replaced if the system is moved frequently?

Inspect the latch arms and strain relief after every move; replace the cable if either latch no longer clicks firmly or if the yellow jacket shows kinks or exposed shielding near the plugs.

More in SATA & eSATA Drive Cables

Similar items