We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 31in SATA III cable with right-angle and straight low-profile connectors

SATACables

SATACables 31in SATA III Low Profile Non-Latching Right to Straight SATA cable

SKU CH-JRRM-58D07

A 31-inch SATA III cable with low-profile right-angle and straight connectors, shielded for EMI protection and rated for 6.0 Gbps throughput

  • SATA III 6.0 Gbps throughput for fast data transfer
  • Low-profile right-angle connector improves airflow inside the case
  • Shielded cable with silver meshing protects against EMI/RFI interference
  • Backwards compatible with SATA 1.5 Gbps and 3.0 Gbps devices
  • Durable flexible rubber sleeve allows easy routing in tight spaces

SATACables 31in SATA III Cable

This 31-inch SATA III cable connects a motherboard host port to a Serial ATA hard drive, optical drive or other SATA device. The right-angle connector on one end and straight connector on the other suit tight spaces around drive cages or notebook bays. It is built for builders who need a single internal data link without excess cable length.

Low-Profile Right-Angle Fit

The narrow, low-profile right-angle plug reduces the clearance needed behind a drive, leaving more room for airflow around storage bays. A flexible rubber sleeve allows the cable to be routed cleanly without blocking intake fans or larger expansion cards. Shielded construction protects the signal from EMI and RFI noise inside a crowded case. Builders who need a left-angle or straight-to-straight orientation will need a different cable.

6 Gbps Headroom for SATA Drives

Rated for SATA revision 3.0, the cable supports up to 6.0 Gbps throughput and is backward compatible with 1.5 Gbps and 3.0 Gbps devices. It handles modern SSDs and mechanical hard drives at their full interface speed without bottleneck. The point-to-point dedicated bus keeps latency low for single-drive workloads. Users running multi-drive arrays or external eSATA enclosures should verify port count and cable length separately.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $1.99
Cheaper than about 97% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Model name30SR787YN

Questions about this item

How far can the 31 in SATA III cable reach inside a full-tower case?

The 31 in length spans from a bottom-mounted motherboard SATA port to a top drive bay in most full-tower chassis.

Does the low-profile right-angle connector block airflow when the cable runs all day?

The narrow yellow connector and shielded rubber sleeve leave clearance for front-to-back airflow even during continuous operation.

Which SATA port generation must the motherboard provide for the 6.0 Gbps rating?

A SATA revision 3.0 (SATA III) port is required; the cable is backwards compatible with 1.5 Gbps and 3.0 Gbps ports.

More in SATA & eSATA Drive Cables

Similar items