Aomoproing SFF-8643 to 4x SATA angle cable 1M 3.3FT
Connects a Mini SAS SFF-8643 host port to four SATA drives using a 90-degree, 3.3 ft cable for tight spaces
Cable Length 3.3 Feet
- 1.64 Feet$11.99
- 3.3 Feet$19.99
- Connects RAID controller to four SATA drives via SFF-8643 host interface
- 90-degree angled connectors simplify routing in tight chassis spaces
- Supports 12 Gb SAS throughput for high-speed storage access
- 3 ft length suits standard server and workstation builds
- Hybrid SFF-8643 design enables smooth 6 Gb to 12 Gb migration
Internal Mini SAS to SATA cable
This Aomoproing cable links a motherboard or RAID controller with an SFF-8643 host port to four SATA hard drives. The 90-degree connectors help route wires cleanly inside tight enclosures. It is built for internal storage arrays that use the SFF-8643 interface.
Passive design, no extra power
The assembly draws no external power and adds no active cooling, so it runs silently and does not increase system thermals. Signal integrity is maintained across the 3.3-foot length for standard SAS or SATA speeds. Cable bulk is minimal, aiding airflow in dense drive cages.
SFF-8643 host-port requirement
The SFF-8643 end must plug into a host-side port on a controller or motherboard; it will not function when connected to a backplane SFF-8643 receptacle. Buyers whose chassis only expose backplane ports cannot use this cable.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing SFF86434 12G Mini SAS SFF-8643 to 4 SATA Cable 1.64ft
Aomoproing SFF86434 100cm 12G HD Mini SAS SFF-8643 to 4 SATA Cable
Questions about this item
How do I plug the SFF-8643 end into my RAID controller without bending the 90-degree connector?
Align the keyed SFF-8643 plug with the controller port and press straight in; the right-angle hood clears adjacent slots so you do not need to force the cable sideways.
Will the four SATA plugs wear out or need periodic replacement?
The SATA connectors are rated for standard mating cycles; no scheduled replacement is required unless a latch breaks or a pin is damaged during drive swaps.
At what throughput does the 1M length hit its practical ceiling under sustained transfers?
The cable supports 12 Gb SAS signalling; sustained throughput is limited by the attached drives and controller, not by the 1 metre assembly.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II










