Aomoproing SFF86434 100cm 12G HD Mini SAS SFF-8643 to 4 SATA Cable
Connects a 12 Gbps SFF-8643 controller to four SATA drives over a 100 cm cable with latch-locking connectors and P1–P4 markers
Cable Length 3.3 Feet
- 1.64 Feet$11.99
- 3.3 Feet$17.99
- Connects 12 Gbps RAID controller to four SATA drives
- 36-pin SFF-8643 host with latch locking for secure fit
- Four 7-pin SATA target connectors with stainless steel latches
- 100 cm length with woven mesh sheath for easy routing
- P1-P4 markers simplify drive identification after installation
SFF-8643 to 4 SATA Cable
This 100cm cable connects a 12 Gbps RAID controller with an SFF-8643 port to four SATA hard drives. It is built for internal server or workstation storage arrays using direct-attached backplanes. The forward pinout links the host controller to target drives.
Sustained Operation
Woven mesh sheathing covers half the cable length to simplify routing inside dense chassis without restricting airflow. Acetate cloth tape over the slim ribbon conductors provides strain relief while keeping the assembly flexible for tight bends. Stainless steel latches on every SATA connector resist vibration during continuous operation.
6 Gbps Per Drive Limit
Each of the four SATA links runs at 6 Gbps, so the aggregate throughput depends on the controller and drive mix rather than the cable alone. The hybrid design supports 3 Gbps and 6 Gbps SATA devices while the host side negotiates up to 12 Gbps SAS. Buyers needing 12 Gbps per individual drive must use SAS targets instead of SATA.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing SFF86434 12G Mini SAS SFF-8643 to 4 SATA Cable 1.64ft
Questions about this item
How much heat does the 12G HD Mini SAS SFF-8643 to 4 SATA cable generate during continuous operation?
The passive cable assembly generates no measurable heat of its own; only the attached controller and drives produce warmth.
What controller must I already own to use the SFF-8643 male connector?
A RAID controller or HBA with an SFF-8643 port, such as the Adaptec 71605 or 7895, is required.
Will the 6 Gbps per lane rating limit my older 3 Gbps SATA drives?
Each SATA connector negotiates down to 3 Gbps automatically, so legacy drives work without configuration.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
EN-Labs SFF80884SATA1M Mini SAS 36Pin SFF-8088 Male to 4 SATA 7Pin Female Cable 3.3ft
- 3.3 ft (1.01 m)
- Mini SAS
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
TeKit eSATAp to SATA 22pin & IDE 4pin 5V 12V Cable 50cm/1.6ft
- 1.64 ft (0.5m)
- eSATAp Power ESATA…










