BUCIER Mini SAS 36Pin SFF-8643 to SFF-8644 Cable 1m
Connects internal 36-pin SFF-8643 ports to external SFF-8644 enclosures for 12Gb/s SAS drives
Cable Length 3.3 Feet
- 3.3 Feet$41.99
- 6.6 Feet$18.99
- 12Gb/s SAS bandwidth for fast drive transfers
- 36-pin SFF-8643 to SFF-8644 connects internal controller to external enclosure
- 1m length fits standard server chassis layouts
- Compatible with LSI 9380-8E and Areca ARC-1883X controller cards
- New cable ready for immediate deployment
Internal-to-external SAS cable
This 1 metre cable converts an internal SFF-8643 connector on a controller card to an external SFF-8644 port for direct enclosure attachment. It is built for administrators and builders who need to route 12Gb/s SAS links outside the chassis without an intermediate backplane.
Twelve-gigabit interface ceiling
The assembly is rated for the 12Gb/s SAS interface used by current hard drives and SSDs. Signal integrity is maintained across the 36-pin Mini SAS interface, but the cable cannot exceed the electrical limits of the 12G standard or compensate for controller firmware that does not negotiate the top speed.
One-metre reach for rack enclosures
At 1m (3.3ft) the cable comfortably spans from a host adapter to an adjacent JBOD or disk shelf in the same rack. Longer runs to distant cabinets or multi-rack deployments will require the 2m (6.6ft) variant or active extension, because passive copper cannot reliably carry 12G signalling beyond this length.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $41.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
BUCIER USB C Cable 100W PD 5A QC 4.0 Zinc Alloy Nylon Braided 6.6ft
- Lighting to USB C
Questions about this item
Should I pick the 1 m or 2 m version for my server build?
Choose 1 m for tight internal routing to an external enclosure; choose 2 m if the controller card and external chassis are farther apart.
What does the 12 Gb/s rating mean when the cable is installed?
It allows each lane to carry up to 12 Gb/s between a 12G SAS controller and attached drives or enclosures.
How do the SFF-8643 and SFF-8644 connectors limit the link?
The internal SFF-8643 plugs into the controller and the external SFF-8644 connects the enclosure, capping the link at 12 Gb/s per lane.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
CoolGear SATA IDE USB Adapter Kit Limited Edition Pro Aluminum Shell Black Silver
- Connects 2.5 in, 3.…
- IDE + SATA Adapter
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
BUCIER SF-105-0.5M-XY U.2 SFF-8639 68pin Male to Female Extension 50cm
- U.2 Sff-8639 68pin…
- Copper
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
METRA AX-S100A SATA / IDE to USB 3.2 Gen1 Type-C adapter with 1.8 in cable and 12V 2A power
- 1.8 in (4.57 cm)
- SATA










