We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 25ft Cat6a Ethernet Cable Gray 24AWG 500MHz 10GBASE-T UTP

SKU CH-WF29-HT21Y

A 25 ft Cat6a patch cable rated for 10 Gbps at 500 MHz with 24 AWG bare copper, gold-plated RJ45 connectors and a snagless boot for gaming consoles, PCs and network gear

  • Cable category6A
  • First connectorRJ45
  • Second connectorRJ45
  • Conductor gauge24 AWG
  • Product typeNetwork Ethernet Cables
  • Overall length25 ft (7.62 m)
  • 10 Gbps wired speed over 25 ft with 500 MHz Cat6a rating
  • Low-latency gaming on PS5, Xbox or PC beats Wi-Fi stability
  • 24 AWG bare copper with cross-spline core cuts crosstalk at 6.9 mm OD
  • 50-micron gold RJ45 contacts plus snagless boots protect the locking clip
  • Backward compatible with Cat6 and Cat5e for a drop-in network upgrade

Wired Gaming Link

This 25ft Cat6a patch cable provides a stable 10 Gigabit connection for PS5, Xbox or gaming PC, cutting lag and jitter compared with wireless. The 24AWG stranded bare copper conductors and cross-spline design maintain signal quality at 500MHz across the full 100m Cat6a distance. Backward compatibility with Cat6 and Cat5e means it drops straight into existing home or office networks.

Passive Cooling && Zero Power

As an unshielded UTP cable with no active components, it generates no heat, draws no power and produces no noise during normal use. The 6.9mm outer diameter and flexible PVC jacket allow tidy routing through tight spaces without kinking or signal degradation. Gold-plated contacts resist corrosion to preserve long-term conductivity.

Snagless Boot && Verified Build

Molded strain-relief boots protect the locking clip from snapping during insertions or cable pulls, reducing service calls. The 50-micron gold-plated 8P8C connectors and RoHS-compliant construction meet UL and ETL verification for safety and performance. No software, drivers or configuration are required — simply plug in to any router, switch, PoE injector, NAS or smart TV.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 58% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameGENERIC
Product typeNetwork Ethernet Cables
Product colorGray
Connectivity
Cable category6A
Ports & slots
First connectorRJ45
Second connectorRJ45
Size & build
Overall length25 ft (7.62 m)
ShieldingNo
Conductor gauge24 AWG

Other versions of this model

5 more in the same range

Questions about this item

How do I route the 6.9 mm cable through tight bends without damaging the cross-spline core?

Pull the cable by the jacket, not the connector, and keep bends wider than four times the 6.9 mm diameter; the snagless boot protects the locking clip while you thread it through conduit or behind furniture.

When should I replace the cable if the 50-micron gold contacts wear or the jacket cracks?

Replace it if you see intermittent 10G link drops, visible conductor exposure, or cracked PVC near the boot; the stranded 24 AWG conductors flex well but physical damage degrades the 500 MHz signal margin.

What limits the 10GBASE-T throughput first on a 25 ft run — length, crosstalk or connector loss?

At 25 ft you are well under the 100 m Cat6a channel limit, so the first limit under sustained load is typically connector return loss or alien crosstalk in dense bundles, not the cable length itself.

More in Ethernet & LAN Cables

Similar items