EN-Labs 5PKSATAIII25CMCL90 5-pack SATA cable 10in 90° locking latch clear
- 10 in (25.4 cm)
- SATA Data Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Five SATA 3.0 cables with locking latches, 10-inch straight-to-90-degree connectors in UV red for internal drives
Cable Length 10 in.
Style 1 Angle
This pack contains five SATA 3.0 cables rated for 6 Gbps transfer speed. Each cable measures 10 inch (25 cm) and features a straight connector on one end and a 90 degree connector on the other. The UV red finish adds visibility inside the case. They connect motherboards or host controllers to internal hard drives and optical drives.
Locking latches on both connectors keep the link secure during continuous read and write operations. The SATA III specification supports up to 6 Gbps, maintaining that rate across the full 10 inch length without signal degradation. Backward compatibility with SATA I and SATA II ensures the cables work with older drives and controllers at their native speeds.
These cables replace worn, unlatched or too-short leads that can disconnect under vibration. The 180 to 90 degree angle eases routing in tight drive bays and against side panels. The five-pack covers a typical RAID array or multiple drive upgrades in one purchase. They do not carry power, so a separate power connection is still required for each drive.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | 5PKSATAIII25CMRD90 |
| Product type | SATA Data Cable |
| Product color | UV Red |
| Performance | |
| Rated speed | 6Gb/s |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Size & build | |
| Overall length | 10 in / 25CM |
| Cable length | 10 in (25.4 cm) |
Other versions of this model
The cables are passive data links with no active electronics, so they generate no measurable heat and consume no power of their own.
You need a motherboard or host controller with a standard SATA port and a drive that also uses a standard SATA data connector.
They are backwards compatible with SATA I and II devices, so the older drive will simply run at its own rated speed.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?