We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 24-inch SATA cable with right-angle and straight locking connectors

EN-Labs

EN-Labs SATA cable 24" 90° to 180° locking UV Red

SKU CH-ZTMY-5R2R2

A 24-inch SATA III data cable with a 90-degree to 180-degree angled latch connector for secure internal drive connections at up to 6.0 Gbps

  • Cable length24 in (61 cm)
  • Connector count2
  • Connector details1 x SATA to 1 x SATA
  • Connector genderFemale to Female
  • Conductor typeCopper Conductor
  • Product typeSATA III
  • 90° to 180° angled connectors ease routing in tight cases
  • Locking latch on straight end secures connection against vibration
  • SATA III 6.0 Gbps support handles modern SSD speeds
  • 26 AWG tinned copper conductors with shielding protect signal integrity
  • 24 inch length fits standard drive-to-motherboard runs

24-inch SATA III data cable with latch

This 24-inch SATA III cable connects 2.5-inch SSDs and 3.5-inch hard drives to motherboard ports or host controllers. One end is a 90-degree receptacle and the other is a straight 180-degree connector, both with 7-pin keyed sockets. The straight end includes a latch that clicks into place for a secure fit in tight drive cages. Shielded 26 AWG tinned copper conductors carry the signal.

Suits builds needing a right-angle drive connection

The right-angle plug keeps the cable close to the drive PCB, useful in cramped enclosures or behind backplanes where a straight plug would foul the side panel. It is not for external eSATA brackets or hot-swap bays that require a shielded bulkhead connector. Buyers who need a straight-to-straight layout or a longer run for full-tower routing should look at a different cable.

6 Gbps SATA III signalling

The cable is rated for SATA revision III at 6.0 Gbps and is backwards compatible with SATA I and II ports. Actual throughput is limited by the slowest device in the link, so a SATA II drive or port will operate at its native speed.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 90% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeSATA III
Design style1 Angle
Ports & slots
Connector count2
Connector details1 x SATA to 1 x SATA
Connector genderFemale to Female
Size & build
Overall length21 in - 25 in
Cable length24 in (61 cm)
Cable shieldingYes
Conductor typeCopper Conductor

Questions about this item

How much space does the 90-degree connector need behind a 2.5-inch SSD?

The right-angle end adds about 24 mm beyond the drive's SATA port, so allow at least 25 mm between the drive and the case wall or adjacent card.

Which end should I plug in first when the straight connector has a latch?

Insert the 90-degree end into the drive, then press the straight latch end into the motherboard until it clicks; forcing the latch end first often bends the key.

When should I replace this cable if transfer speeds drop?

Swap it if the latch no longer holds, the 26 AWG conductors show kinks, or the UV-red jacket cracks near the 90-degree bend after repeated routing.

More in SATA & eSATA Drive Cables

Similar items