We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA cable with 90-degree and straight locking connectors, 24 inches

EN-Labs

EN-Labs SATA24BK90 24" SATA III 90° to 180° locking cable

SKU CH-TZ25-WFWPB

A 24-inch SATA III cable with a 90-degree to 180-degree locking connector for secure internal drive connections

  • Cable length24 in (61 cm)
  • Connector count2
  • Connector details1 x SATA to 1 x SATA
  • Connector genderFemale to Female
  • Conductor typeCopper Conductor
  • Product typeSATA III
  • Secure latch keeps the cable seated in tight builds
  • 90° to 180° routing clears cramped drive bays
  • 24-inch length reaches most motherboard-to-drive runs
  • 0 Gbps SATA III support with legacy SATA I/II compatibility
  • 26 AWG tinned copper conductors with UL listing and RoHS compliance

Cable geometry and locking

The EN-Labs SATA24BK90 is a 24-inch SATA III data cable with one 90-degree and one straight 180-degree connector. Both ends use a 7-pin latching receptacle that clicks into place, preventing accidental disconnection in tight drive bays. It suits system builders and IT technicians who need a reliable link between a motherboard or host controller and a SATA hard drive or SSD.

Sustained throughput behaviour

Rated for SATA revision III at up to 6.0 Gbps, the cable maintains that bandwidth across its full length without signal degradation. The 26 AWG tinned copper conductors and full shielding keep crosstalk low during long file transfers or continuous backup jobs. Actual speed is limited by the connected drive and controller, not by the cable itself.

Build quality and daily implications

UL listed and RoHS compliant, the cable uses durable moulded strain relief at each end to resist fatigue from repeated insertion. The mixed-angle design routes cleanly along chassis walls or behind drive cages, reducing clutter and improving airflow. The locking latch stays engaged even when vibration or cable movement occurs during routine maintenance.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 90% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model nameSATA24BK90
Product typeSATA III
Design style1 Angle
Ports & slots
Connector count2
Connector details1 x SATA to 1 x SATA
Connector genderFemale to Female
Size & build
Overall length21 in - 25 in
Cable length24 in (61 cm)
Cable shieldingYes
Conductor typeCopper Conductor

Questions about this item

Does the 90-degree latch connector add any heat or power draw when the cable runs continuously?

The cable is passive with 26AWG copper conductors and shielding, so it adds no heat or power draw during all-day operation.

What motherboard port and drive connector must already be present for this 24-inch SATA III cable to work?

A standard 7-pin SATA port on the motherboard or host controller and a matching 7-pin SATA connector on the drive are required.

Will the 90-degree-to-180-degree locking cable work with an older SATA I or SATA II drive I plan to keep?

Yes, the cable is backwards compatible with SATA I and SATA II ports while supporting up to 6.0 Gbps on SATA III.

More in SATA & eSATA Drive Cables

Similar items