We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

EN-Labs

EN-Labs SATA6BK SATA III 6" locking cable — Black

SKU CH-GPDV-V9RJM

A 6-inch SATA III data cable with locking 180-degree connectors and 26AWG tinned copper conductors for secure 6.0 Gbps drive connections

  • Cable length6 in (15.2 cm)
  • Connector count2
  • Connector details1 x SATA to 1 x SATA
  • Connector genderFemale to Female
  • Conductor typeCopper Conductor
  • Product typeSATA III
  • Secure latch prevents accidental disconnects
  • 0 Gbps bandwidth supports fast SSDs and HDDs
  • 26 AWG tinned copper conductors reduce signal loss
  • 6-inch length keeps tight builds tidy
  • UL listed and RoHS compliant for safety and environmental standards

Short 6-inch SATA III cable

The EN-Labs SATA6BK is a 6-inch SATA III data cable with latching connectors on both ends. It links 7-pin SATA drives to motherboards or host controllers inside a chassis. The short length suits cramped drive bays or backplane setups where longer cables would obstruct airflow.

SATA III 6 Gbps interface limit

The cable supports the SATA revision III electrical specification up to 6.0 Gbps and remains backwards compatible with SATA I and II ports. Actual throughput is capped by the slowest connected device or controller, so a SATA III SSD on a SATA II port will run at the lower rate.

Capacity headroom for single drives

One cable carries a single drive connection; it cannot serve multiple devices or split bandwidth. The 26AWG tinned copper conductors with shielding handle the full 6 Gbps signal for one SSD or HDD, but a second drive requires an additional cable and a free motherboard port.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 90% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model nameSATA6BK
Product typeSATA III
Product colorBlack
Ports & slots
Connector count2
Connector details1 x SATA to 1 x SATA
Connector genderFemale to Female
Size & build
Overall length6 in (15.2 cm)
Cable length6 in (15.2 cm)
Cable shieldingYes
Conductor typeCopper Conductor

Questions about this item

Should I pick a 6-inch or longer SATA cable for my build?

The 6-inch length suits tight drive cages and short motherboard-to-drive runs; choose a longer cable only if the routing path exceeds that distance.

What does the 6.0 Gbps rating mean for my SSD or HDD?

It supports the SATA III maximum of 6.0 Gbps, so a SATA SSD can reach its rated sequential speed; actual throughput is limited by the drive and controller.

How does the SATA III interface and locking connector affect installation?

The cable uses a 7-pin SATA 180-degree latching receptacle that clicks onto SATA III, II or I ports, providing a secure fit that resists vibration in dense cases.

More in SATA & eSATA Drive Cables

Similar items