STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 18-inch SATA III data cable with locking latches for secure drive connections, supporting 6.0 Gbps speeds and backward compatibility
The EN-Labs SATA III cable carries data at up to 6.0 Gbps between a motherboard or host controller and a 2.5 or 3.5 inch drive. Its 18 inch length suits typical desktop chassis and the UV red jacket aids cable identification in a busy build.
Confirm your drive and motherboard both present a standard 7 pin SATA data port. The straight 180 degree latching connectors require a few millimetres of clearance behind the port, so check that adjacent components or a snug drive cage will not block insertion.
Shielded 26 AWG tinned copper conductors resist signal degradation and the UL listed, RoHS compliant jacket meets baseline safety and environmental standards. The integrated latch clicks home to prevent accidental disconnection during transport or vibration, yet releases with a simple thumb press when you need to swap drives.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | SATA III |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 16 in - 20 in |
| Cable length | 18 in (45.7 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
The package contains one cable with a 7-pin latching SATA connector on each end, so no extra connectors are needed.
The cable is supplied at 18 inches; the 16 to 20 inch range in the spec simply reflects manufacturing tolerance.
It supports the SATA III 6 Gbps specification; actual throughput will match the slowest device on the link.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?