We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
10-inch UV-blue SATA III cable with straight locking connectors

EN-Labs

EN-Labs SATA10UVBL 10 inch SATA III cable UV Blue

SKU CH-3PMM-169PK

A 10-inch SATA III cable with latching connectors supports 6.0 Gbps transfers and fits tight spaces

  • Connector count2
  • Connector details1 x SATA to 1 x SATA
  • Connector genderFemale to Female
  • Conductor typeCopper Conductor
  • Product typeSATA III
  • Overall length6 in - 10 in
  • 6 Gbps data rate for fast storage transfers
  • 10 inch length fits compact builds cleanly
  • Latching connectors prevent accidental disconnects
  • 26 AWG tinned copper with shielding ensures signal integrity
  • Backwards compatible with SATA I and II ports

EN-Labs SATA III 10 inch cable

This 10 inch SATA III data cable connects hard drives or SSDs to a motherboard or host controller. It uses 26AWG tinned copper conductors and supports up to 6.0 Gbps transfer speed. The cable is UL listed and RoHS compliant for safety and environmental standards.

180 degree latching connectors

Builders working in tight cases benefit from the straight 180 degree latch design that secures the connection. The cable is backwards compatible with SATA I and II ports for older drives. Users needing angled connectors or longer runs for full-tower layouts should look elsewhere.

10 inch length and 6 Gbps headroom

The short length keeps cable routing tidy while delivering full SATA III bandwidth for solid-state drives. Mechanical hard drives will not saturate the 6 Gbps link in typical use. Very long cable runs or external enclosures requiring eSATA are not supported by this cable.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 90% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model nameSATA10UVBL
Product typeSATA III
Design styleStraight
Ports & slots
Connector count2
Connector details1 x SATA to 1 x SATA
Connector genderFemale to Female
Size & build
Overall length6 in - 10 in
Cable shieldingYes
Conductor typeCopper Conductor

Questions about this item

What motherboard or host-controller port is required for this 10-inch SATA III cable to work?

A standard 7-pin SATA port on the motherboard or host controller is needed; the cable’s straight 180-degree latching connectors plug directly into that port.

Will this cable run at full speed with a SATA II hard drive I already own?

Yes, the cable is backwards compatible with SATA I and II ports, so the older drive will operate at its own rated speed.

How can I verify the link is running at 6.0 Gbps after I connect the cable?

Check the negotiated link speed in the BIOS or OS storage utility; it should report 6 Gbps when both the drive and port support SATA III.

More in SATA & eSATA Drive Cables

Similar items