STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 18-inch SATA III cable with a 90-degree to 180-degree latching design for secure drive connections at up to 6.0 Gbps
The EN-Labs SATA18UVBL90 is an 18 inch SATA III data cable with a 90 degree connector on one end and a straight 180 degree connector on the other. It links SATA I, II or III hard drives and SSDs to internal motherboard ports or host controllers. The UV blue jacket makes the cable easy to identify inside a chassis.
The straight connector includes a latch that locks into the port so vibration or tight routing cannot pull it loose. Shielded 26AWG tinned copper conductors support the full 6.0 Gbps SATA III specification while remaining backwards compatible with slower SATA revisions. UL listing and RoHS compliance confirm the materials meet recognised safety and environmental standards.
The 90 degree plug fits against drive bays or motherboard headers where a straight plug would hit adjacent components or the case wall. At 18 inches the reach suits typical mid-tower layouts without leaving excess slack that blocks airflow. Builders who need a longer run or a different angle combination will need another cable.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA18UVBL90 |
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 16 in - 20 in |
| Cable length | 18 in (45.7 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
The latch is moulded into the 7-pin receptacle and rated for the cable's lifetime; no separate replacement part is required.
The 26 AWG tinned copper conductors and 6.0 Gbps SATA III spec set the ceiling; actual speed cannot exceed the slowest attached device.
Shielding is passive foil and braid; it adds no measurable heat and the cable draws only the negligible signal current of the SATA link.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?