STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 24-inch SATA cable with a 90-degree to 180-degree angled connector and latch for secure internal drive connections
The EN-Labs SATA24UVBL90 is a 24 inch SATA III data cable with one 90 degree connector and one 180 degree connector. It links a hard drive or solid-state drive to a motherboard or host controller in builds where the drive sits close to the board edge or behind other cards. The latch on the straight end secures the connection in tight spaces.
A copper conductor and 26AWG gauge carry the signal, while shielding helps reject interference inside a crowded case. The design supports SATA revision III up to 6.0 Gbps and remains backwards compatible with SATA I and II ports. UL listing and RoHS compliance confirm the materials meet recognised safety and environmental standards.
Under continuous read or write workloads the cable maintains the rated link speed as long as the attached drive and controller can sustain it. The fixed 24 inch length limits routing options in larger chassis, and the single-angle layout may not suit drives mounted at unconventional angles. Actual throughput is always bounded by the slowest device in the chain.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA24UVBL90 |
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 21 in - 25 in |
| Cable length | 24 in (61 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Route the 90-degree plug to the drive in tight bays and the 180-degree plug to the motherboard; the latch on the straight end clicks only when fully seated.
No scheduled maintenance; replace only if the latch breaks or the 26AWG conductors show damage from repeated flexing.
The practical ceiling is the 6.0 Gbps SATA III rating; actual throughput cannot exceed the slowest connected device.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?