We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules, no heat spreader, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V ECC Registered RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-KS1X-A253D

A 32 GB DDR5 registered ECC kit with two 16 GB modules running at 5600 MT/s, CL46 and 1.1 V for the Supermicro H13SSL-N motherboard

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB 2X16GB

Show 24 more
  • 32 GB capacity from two 16 GB modules expands server memory headroom
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSL-N
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory-controller voltage specification
  • 288-pin RDIMM form factor fits the exact slot type the motherboard requires

Supermicro H13SSL-N DDR5 RDIMM kit

This 32 GB kit provides two 16 GB DDR5-5600 registered ECC modules built for the Supermicro H13SSL-N motherboard. Each stick runs at 1.1 V with CL46 latency and a 1Rx8 organisation. The 288-pin RDIMM form factor matches the board's registered-memory slots exactly.

Suited for capacity upgrades on H13SSL-N systems

Administrators expanding memory on a validated Supermicro H13SSL-N platform will receive the correct registered ECC configuration without guesswork. Builders using consumer boards, unbuffered DIMM slots, or SODIMM form factors cannot use this kit and should look for memory that matches their platform.

32 GB registered ECC capacity

The dual-rank kit delivers 32 GB of error-correcting memory that the memory controller can address fully populated at rated speed. Workloads requiring larger per-socket capacities, higher frequencies, or lower latencies than CL46 will exceed what this specific kit provides.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,006.99
Pricier than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $31.47 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does my Supermicro H13SSL-N motherboard need to support DDR5 5600 Registered ECC RDIMMs for this kit to work?

Yes, the H13SSL-N must accept DDR5 5600 Registered ECC RDIMMs; the kit is spec-matched to that board's memory-population rules and 288-pin RDIMM form factor.

Can I mix these 1Rx8 CL46 modules with existing DDR5 RDIMMs of a different rank or latency in the same server?

Mixing ranks or latencies is not recommended; the board's memory controller expects uniform 1Rx8 CL46 timing across all populated slots for stable operation at full 5600 speed.

How do I verify the kit is running at DDR5 5600 with ECC active after installation?

Check the BIOS memory information or OS hardware report for 5600 MT/s speed, CL46 timings, 1.1V voltage and ECC status reported as enabled on each 16 GB module.

More in Model-Specific Memory Upgrades

Similar items