We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM sticks with black chips no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 576GB 6x96GB ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-3S4T-P7WYT

A 576GB DDR5-5600 ECC RDIMM kit of six 96GB modules at 1.1V CL46, registered for full-capacity stability on Supermicro H13SSL-N

  • Total capacity576 GB (6 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 576GB 6X96GB

Show 24 more
  • Massive 576 GB capacity from six 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects errors and stabilises full population
  • 1 V operation matches the server memory controller spec
  • Verified fit for Supermicro H13SSL-N motherboard

Exact-Match DDR5 Server Upgrade

This 576GB kit provides six 96GB DDR5-5600 Registered ECC RDIMMs built to the Supermicro H13SSL-N motherboard's precise specifications. The modules operate at 1.1V with CL46 latency and a 2Rx4 rank structure that the memory controller expects. System administrators upgrading compatible Supermicro platforms receive the exact capacity and timing the board validates at full population.

Sustained Enterprise Stability

Registered buffering offloads the memory controller so all six slots run fully populated at rated speed without signal degradation. ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption during continuous workloads. The 1.1V operating voltage keeps thermal output consistent across extended 24/7 operation in dense server chassis.

2Rx4 Rank Population Constraint

The 2Rx4 organisation determines whether this kit works in your specific H13SSL-N configuration; the board's memory-population rules allow only certain rank-per-channel combinations at maximum capacity. Builders needing a different rank structure or fewer populated slots cannot use this exact kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $16,430.99
Pricier than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 576 GB (6 × 96 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $28.53 per GB
Pricier than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K6
Total capacity576 GB (6 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items576 GB 6 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 576GB DDR5 5600 kit draw at its rated 1.10V when the server runs continuously?

The kit operates at 1.10V, the standard DDR5 voltage, and uses registered ECC RDIMM modules that buffer signals to reduce electrical load on the memory controller during sustained full-capacity operation.

What motherboard slot type and population rules must my Supermicro H13SSL-N already have to accept this 6x96GB kit?

The board must provide 288-pin DDR5 RDIMM slots and support six 2Rx4 registered modules; consult the motherboard manual for the approved population order before installing all six DIMMs.

Will the CL46 2Rx4 registered ECC modules run at 5600MHz alongside any existing DDR5 RDIMMs I keep in the other slots?

The kit is spec-matched to the H13SSL-N memory controller at DDR5 5600 CL46 1.10V 2Rx4; mixing different ranks, speeds or latencies can force the controller to downclock all channels to the lowest common settings.

More in Model-Specific Memory Upgrades

Similar items