We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 384GB (4×96GB) CL46 1.1V 288-Pin Supermicro H13SSL-N memory upgrade

SKU CH-T9RZ-WDTC1

A 384GB DDR5-5600 ECC registered RDIMM kit of four 96GB modules at 1.1V CL46, validated for the Supermicro H13SSL-N motherboard

  • Total capacity384 GB (4 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 384GB 4X96GB

Show 24 more
  • 384 GB capacity across four 96 GB modules for dense server workloads
  • DDR5-5600 PC5-44800 speed matches the Supermicro H13SSL-N memory controller
  • Registered ECC with 2Rx4 rank offloads the controller and corrects single-bit errors
  • 1 V operation at CL46 keeps power draw low in fully populated slots
  • 288-pin RDIMM form factor fits the board's required slot type exactly

Exact-Match Server Memory Upgrade

This NEMIX RAM kit delivers 384GB of DDR5 registered ECC memory in four 96GB modules. It is built for the Supermicro H13SSL-N motherboard and matches the board's required rank, voltage, and timing so the system recognises the full capacity at rated speed. Administrators expanding memory density in compatible Supermicro platforms will find the spec-aligned kit removes guesswork during qualification.

Thermals Noise and Power Draw

Each module operates at 1.10V without a heat spreader, relying on the server chassis airflow for cooling. The registered architecture buffers address and control signals, reducing electrical load on the memory controller when all slots are populated. In typical enterprise workloads the kit runs within standard DDR5 power envelopes and produces no audible noise of its own.

When the Upgrade Is Worth It

The kit replaces smaller-capacity RDIMM sets or mixed-rank configurations that limit total addressable memory or force down-clocking. It is not suited for workstations or consumer boards that accept only unbuffered UDIMMs, nor for systems that cannot populate four registered DIMMs per channel. Install when the workload demands maximum registered ECC capacity at DDR5-5600 and the motherboard manual confirms the 4×96GB population rule.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $10,736.99
Pricier than about 88% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (4 × 96 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $27.96 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K4
Total capacity384 GB (4 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items384 GB 4 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the four 96GB DDR5 5600 RDIMMs in my Supermicro H13SSL-N, and which slot order do people get wrong?

Populate the four DDR5 slots following the motherboard manual's exact population sequence; the board requires Registered ECC RDIMMs in a specific order so the memory controller initialises all 384GB at 5600 MT/s.

What maintenance or replacement will this 384GB DDR5 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; ECC corrects single-bit errors automatically, and a module is only replaced if the system logs uncorrectable errors or a DIMM fails POST.

What limit appears first when the Supermicro H13SSL-N runs all four 96GB RDIMMs at 5600 MT/s continuously?

The memory controller's maximum supported frequency of 5600 MT/s is the first ceiling; sustained loads will not exceed this rated speed.

More in Model-Specific Memory Upgrades

Similar items