We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM memory module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz CL46 ECC Registered RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-RYH7-T47A8

32 GB DDR5-5600 ECC Registered RDIMM, CL46 at 1.1 V, 2Rx8, 288-pin, validated for Supermicro H13SSL-N

  • Total capacity32 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB

Show 24 more
  • Exact-match DDR5-5600 upgrade runs at rated speed on Supermicro H13SSL-N
  • Registered ECC RDIMM design supports full-capacity population with error correction
  • 2Rx8 organisation at 1.1 V matches controller expectations for stable operation
  • CL46 latency delivers responsive throughput for enterprise workloads
  • 288-pin RDIMM form factor fits the board's memory slots without adapters

32GB DDR5 5600 ECC RDIMM for Supermicro H13SSL-N

This 32GB DDR5 5600MHz registered ECC module is built for the Supermicro H13SSL-N motherboard. It delivers 2Rx8 organisation at 1.1V with CL46 timing so the memory controller recognises full capacity at rated speed.

DDR5 RDIMM population rules and registered buffering

The 288-pin RDIMM form factor is required by this board; UDIMM or SODIMM modules will not fit. Registered buffering offloads the memory controller, allowing every slot to run fully populated at full capacity while ECC corrects single-bit errors on the fly.

Upgrade from smaller or slower DDR5 RDIMMs

Replacing lower-capacity or slower DDR5 registered modules with this 32GB kit increases total memory and bandwidth for virtualisation and database workloads. The jump is worth it when your current configuration limits the number of virtual machines or the size of in-memory datasets you can run.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,042.99
Pricier than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $32.59 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K1
Total capacity32 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the 32GB DDR5 5600 CL46 RDIMM or a different capacity for my Supermicro H13SSL-N?

The 32GB DDR5 5600 CL46 RDIMM matches the board's registered ECC requirement and 1.1V operation. Check your manual for approved population rules and maximum supported capacity per slot before deciding.

What does the 5600MHz rating deliver once installed in the Supermicro H13SSL-N?

The module runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V. The registered buffer lets the memory controller drive every populated slot at that rated speed without signal degradation.

How does the 288-pin DDR5 RDIMM interface limit real-world throughput?

The 288-pin RDIMM form factor carries DDR5 5600 signals at 1.1V. The registered clock driver caps electrical load per slot, so bandwidth scales with the board's maximum supported DIMM count and memory-controller channels.

More in Model-Specific Memory Upgrades

Similar items