We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in static bags, no heat spreaders, 288-pin gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 384GB 6x64GB ECC RDIMM 5600 CL46 Supermicro H13SSL-N

SKU CH-M919-A2W0C

384 GB kit of six 64 GB DDR5 5600 RDIMM modules with ECC, registered buffering, 2Rx4 rank, CL46 latency and 1.1 V operation, validated for the Supermicro H13SSL-N motherboard

  • Total capacity384 GB (6 × 64 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 384GB 6X64GB

Show 24 more
  • 384 GB total capacity from six 64 GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput at 1.1 V
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 288-pin RDIMM form factor matches Supermicro H13SSL-N motherboard slot requirements exactly
  • Built with major OEM Samsung, Micron or Hynix DRAM chips for enterprise-grade reliability

Exact-Match 384GB DDR5 Kit

This 384GB kit contains six 64GB DDR5 5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSL-N motherboard expects. The modules run at CL46 and 1.1V so the server recognises full capacity at rated speed without manual tuning.

Enterprise Servers Only

The registered architecture and ECC suit production workloads that demand full-slot population and single-bit error correction. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC modules or lower capacities should select a different product.

Straightforward Slot Installation

Align the 288-pin modules with the board's keyed slots and press until the latches engage; the registered design offloads the memory controller for stable operation at full population. Errors typically arise when population order in the manual is ignored or when mixed-rank DIMMs are combined with this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $12,321.99
Pricier than about 90% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (6 × 64 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $32.09 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-924K6
Total capacity384 GB (6 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items384 GB 6 × 64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the H13SSL-N motherboard need to support DDR5 5600 Registered ECC RDIMMs for this kit to work?

Yes, the H13SSL-N must accept DDR5 5600 (PC5-44800) 2Rx4 Registered ECC RDIMMs at 1.10 V with CL46 timing; the board's memory controller will only recognise the full 384 GB capacity and rated speed when its specifications match these exact module parameters.

Will the 2Rx4 registered design of these modules allow full 384 GB capacity across all six slots on the H13SSL-N?

The registered architecture offloads the memory controller so every slot runs fully populated at full capacity, and the H13SSL-N's population rules for 2Rx4 DDR5 RDIMMs determine whether all six 64 GB modules can operate together at 5600 MT/s.

How can I verify the kit is running at DDR5 5600 CL46 after installation?

Enter the BIOS or use a hardware-information tool to confirm the memory reports 5600 MT/s (PC5-44800), CAS latency 46, 1.10 V, and all six 64 GB modules recognised as 2Rx4 Registered ECC RDIMMs totalling 384 GB.

More in Model-Specific Memory Upgrades

Similar items