We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with gold contacts and black chips no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 ECC Registered RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-HS0J-Z23FE

32 GB DDR5 5600 CL46 ECC registered RDIMM kit for Supermicro H14DST-FL servers

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB 2X16GB

Show 30 more
  • 32 GB dual-module kit delivers full-capacity server memory
  • DDR5-5600 speed with CL46 latency runs at rated performance
  • Registered ECC design corrects single-bit errors for data integrity
  • 1Rx8 1.10 V modules match Supermicro H14DST-FL memory-controller specs
  • 288-pin RDIMM form factor fits the board's required slot type

Exact-match DDR5-5600 kit for Supermicro H14DST-FL

This 32 GB kit contains two 16 GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the H14DST-FL memory controller expects. It is designed for administrators who need to populate the server with validated modules that run at rated speed without manual tuning.

Verify DIMM population rules before ordering

Server and motherboard memory support varies by model, so consult the system or motherboard manual for supported capacities, approved DIMM population order and installation steps. The board requires 288-pin Registered RDIMMs; unbuffered UDIMMs or SODIMMs will not fit or function in this platform.

Replaces slower or smaller DDR5 RDIMMs in the same

The upgrade is worth it when your current modules run below 5600 MT/s, total capacity is below 32 GB, or you need the stability of registered ECC with 1Rx8 organisation for fully populated operation. It is not for systems that only accept unbuffered memory or platforms limited to earlier DDR generations.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $922.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $28.84 per GB
Pricier than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What is included in the 32GB DDR5 5600 kit and do I need anything else to install it in a Supermicro H14DST-FL?

The kit contains two 16GB 288-pin DDR5 5600 CL46 1.1V ECC Registered RDIMMs (part MR44800-618K2). No extra hardware is required; the modules plug directly into the motherboard's DDR5 RDIMM slots.

Should I choose this 32GB 2x16GB 1Rx8 kit or a different capacity for the H14DST-FL?

This 32GB kit (2x16GB, 1Rx8) matches the board's DDR5 RDIMM population rules and runs at the rated 5600 speed. Select it when your configuration calls for two registered DIMMs at this capacity and rank.

What does the DDR5 5600 (PC5-44800) rating mean once the modules are installed in the server?

The memory will operate at 5600 MT/s with CL46 latency at 1.1V, delivering the full PC5-44800 bandwidth the H14DST-FL's memory controller expects from registered ECC DIMMs.

More in Model-Specific Memory Upgrades

Similar items