We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-G4M0-QBAC1

32 GB DDR5-5600 ECC registered RDIMM built for the Supermicro H14DST-FL server board

  • Total capacity32 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 32 GB capacity lets the Supermicro H14DST-FL run fully populated at rated speed
  • DDR5 5600 (PC5-44800) speed with CL46 latency matches the board's memory-controller expectations
  • 1 V operation and 2Rx8 registered ECC design offload the controller for stable full-load operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin RDIMM form factor is the exact module type the H14DST-FL requires

Exact DDR5-5600 RDIMM for Supermicro H14DST-FL

This 32 GB registered ECC module matches the memory controller requirements of the Supermicro H14DST-FL motherboard. It is built for servers and workstations that need error-correcting memory running at the board's rated speed and voltage. The 288-pin RDIMM form factor fits the DIMM slots this platform provides.

Registered 2Rx8 ECC at 1.1 V and CL46

The module operates at DDR5-5600 (PC5-44800) with a CAS latency of 46, 1.10 V supply, and a dual-rank 2Rx8 organisation. Registered buffering offloads the memory controller so every populated slot runs at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Simple slot installation if population rules are

The RDIMM seats in the standard 288-pin DDR5 slots, but the board's manual dictates which slots must be filled first and how many modules are supported per channel. Ignoring that order is the most common reason a server fails to recognise the full capacity or boots at a reduced speed.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $923.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $28.87 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K1
Total capacity32 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will 5600 MHz run at 5600 MHz in my Supermicro H14DST-FL?

The module is spec-matched to the H14DST-FL, so the memory controller recognises the exact rank, voltage and timing and runs the DIMM at its rated 5600 MHz.

What does PC5-44800 mean for daily throughput?

PC5-44800 is the DDR5-5600 standard designation; the registered ECC design keeps every populated slot stable at that data rate.

Does the 288-pin RDIMM fit the H14DST-FL slots?

Yes, the board requires 288-pin registered DIMMs; this module matches that form factor and the 1.1 V operating voltage.

More in Model-Specific Memory Upgrades

Similar items