We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 ECC RDIMM Supermicro H14SSF memory upgrade

SKU CH-HPFG-Z7YWS

96 GB kit of two 48 GB DDR5 5600 CL46 ECC registered RDIMMs at 1.1 V for Supermicro H14SSF servers

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB 2X48GB

Show 24 more
  • 96 GB capacity across two 48 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency keeps data moving at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the Supermicro H14SSF memory controller specification
  • 288-pin RDIMM form factor fits the board's required memory population rules

96GB DDR5-5600 ECC RDIMM kit for Supermicro H14SSF

This 96GB kit contains two 48GB Registered ECC DDR5 modules rated at 5600MHz with CL46 latency and 1.1V operation. It is built for the Supermicro H14SSF motherboard and matches the board's required 288-pin RDIMM form factor, rank configuration and voltage.

DDR5-5600 bandwidth and Registered DIMM population

The modules run at PC5-44800 speed, delivering the throughput the platform expects when fully populated. Registered buffering offloads the memory controller so every slot can run at rated capacity, while ECC corrects single-bit errors on the fly. Maximum capacity and population order are defined by the motherboard manual, not by the modules themselves.

2Rx8 48GB density per module decides fitment

Each stick uses a 2Rx8 organisation at 48GB density, the exact rank and capacity combination the H14SSF memory controller validates at boot. If your board's qualified-vendor list requires a different rank structure or lower density per DIMM, this kit will not be recognised at full capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,541.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $26.48 per GB
Pricier than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 96GB kit or a smaller capacity for my Supermicro H14SSF?

The 96GB kit provides two 48GB modules that fill two slots at the rated DDR5 5600 speed; smaller kits would leave slots empty and reduce total memory bandwidth.

What does the DDR5 5600 rating deliver inside a running H14SSF system?

The modules operate at 5600 MT/s with CL46 latency at 1.1V, giving the memory controller the exact timing and voltage it expects for full-speed registered ECC operation.

How does the 288-pin RDIMM interface limit or enable this memory on the H14SSF?

The 288-pin registered DIMM form factor matches the H14SSF's DDR5 RDIMM slots, allowing the board to recognise both 48GB ranks per module and run the kit at its full 5600 MT/s rating.

More in Model-Specific Memory Upgrades

Similar items