We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 384GB 4x96GB 5600MHz CL46 ECC RDIMM Supermicro H13SSW

SKU CH-C7E0-9GYG7

384 GB DDR5 5600 MHz ECC RDIMM kit in four 96 GB modules, registered and CL46 for Supermicro H13SSW servers

  • Total capacity384 GB (4 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 384 GB capacity from four 96 GB modules enables maximum memory density
  • DDR5 5600 MT/s speed with CL46 latency delivers rated server performance
  • Registered ECC architecture corrects single-bit errors for data integrity
  • 1 V operation matches motherboard voltage requirements exactly
  • 288-pin RDIMM form factor fits Supermicro H13SSW memory slots precisely

Exact-Match DDR5 Kit for Supermicro H13SSW

This 384GB kit contains four 96GB DDR5 5600MHz RDIMMs built to the Supermicro H13SSW motherboard's precise specifications. Registered ECC architecture with 2Rx4 organisation and CL46 timing ensures the memory controller recognises the full capacity at rated speed. The 1.1V modules are designed for servers that require registered DIMMs rather than unbuffered or SODIMM form factors. Builders needing unregistered memory or consumer platforms should look elsewhere.

Thermals, Noise and Power Draw

Operating at 1.1V, the modules draw minimal power per DIMM even with all four slots populated on the H13SSW. Passive operation without heat spreaders relies on chassis airflow, so a server enclosure with directed cooling is assumed. Registered buffering reduces electrical load on the memory controller, contributing to stable operation under sustained workloads. No active cooling components are included, so acoustic output depends entirely on the host system's fans.

What the Bundle Changes

The kit delivers a matched set of four 96GB RDIMMs tested together for the H13SSW's population rules, eliminating the guesswork of mixing individual modules. ECC and registered operation provide error correction and signal integrity that unbuffered memory cannot, preventing silent data corruption in production environments. Lifetime replacement coverage and US-based technical support back the compatibility claim. Systems requiring UDIMMs, SODIMMs or non-ECC memory cannot use this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $11,178.99
Pricier than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (4 × 96 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $29.11 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K4
Total capacity384 GB (4 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items384 GB 4 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the four 96 GB DDR5 RDIMM modules in the Supermicro H13SSW, and which slot order does the manual require?

Populate all four DDR5 slots following the exact DIMM population sequence shown in the Supermicro H13SSW manual; the 288-pin registered modules must go in the prescribed order so the memory controller recognizes the full 384 GB at DDR5-5600.

Will the ECC registered DDR5 RDIMMs need any firmware updates or scheduled component swaps during their service life?

No firmware updates or scheduled part replacements are required for the DDR5 ECC RDIMM modules; ECC corrects single-bit errors on the fly and the registered architecture maintains signal integrity for the full 384 GB kit.

What is the first thermal or electrical limit reached when the kit runs continuously at 5600 MT/s and 1.10 V?

Sustained operation at DDR5-5600 with 1.10 V is within JEDEC specification; the registered design offloads the memory controller, so the first practical limit is the server chassis airflow capacity rather than the modules themselves.

More in Model-Specific Memory Upgrades

Similar items