We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 CL46 384GB (4×96GB) ECC RDIMM for Supermicro H13SST-G memory upgrade

SKU CH-7ZDW-R11NE

A 384 GB DDR5 server memory kit with four 96 GB registered ECC RDIMMs running at 5600 MT/s CL46 and 1.10 V for the Supermicro H13SST-G

  • Total capacity384 GB (4 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 384GB 4X96GB

Show 24 more
  • 384GB total capacity from four 96GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for Supermicro H13SST-G
  • Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
  • 1V operation matches the board's voltage requirement for stable full-population performance
  • 288-pin 2Rx4 form factor fits the exact DIMM slots and population rules of the target motherboard

Exact-Match DDR5 Kit for Supermicro H13SST-G

This 384 GB kit contains four 96 GB DDR5 5600 RDIMMs built to the precise rank, voltage and timing the server memory controller expects. It is designed for administrators upgrading a Supermicro H13SST-G motherboard with registered ECC memory that will be recognised at full capacity and run at its rated speed. The modules use 2Rx4 organisation and operate at 1.10 V. They are not intended for workstations or desktops that require unbuffered DIMMs or SODIMM form factors.

Registered ECC Architecture and Verified Fitment

Registered buffering offloads the memory controller so every slot runs fully populated at full capacity while ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 288-pin RDIMM form factor matches the board's physical and electrical requirements and is spec-matched to its memory-population rules. No heat spreaders are included and the kit contains only the four memory modules.

Check Motherboard Manual Before Ordering

Server and motherboard memory support varies by model so consult your system or motherboard manual for supported capacities, approved DIMM population order and installation steps before purchase. Verify that your platform accepts 2Rx4 registered DDR5 RDIMMs at 5600 MT/s and that the BIOS revision in use supports the full 384 GB configuration. Buyers needing a different capacity, rank configuration or unbuffered memory should select an alternative kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $11,372.99
Pricier than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (4 × 96 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $29.62 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K4
Total capacity384 GB (4 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items384 GB 4 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 96 GB DDR5 modules need replacement if I run them continuously in the Supermicro H13SST-G?

The DDR5 ECC RDIMM modules are built for server duty; registered buffering and on-die ECC protect data integrity, so replacement is only required if a module itself fails.

What limit appears first when all four 96 GB RDIMMs run at DDR5-5600 CL46 under sustained load?

The memory controller on the H13SST-G reaches its maximum supported capacity of 384 GB before any timing or voltage ceiling is hit.

How much heat and power do the 1.1 V CL46 DDR5 RDIMMs produce when the server runs all day?

At 1.1 V the kit draws minimal power for DDR5-5600 operation, and without heat spreaders the modules rely on chassis airflow to stay cool.

More in Model-Specific Memory Upgrades

Similar items