NEMIX RAM DDR5 4800 ECC RDIMM 512GB 4x128GB CL40 1.1V Server memory upgrade
- 512 GB (4 × 128 GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 512 GB DDR5 ECC registered RDIMM kit of four 128 GB modules running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro H13SVW-NT motherboard
Size 512GB 4X128GB
Speed 5600MHz
This 512 GB kit contains four 128 GB modules that run at 5600 MT/s with CL46 timing at 1.1 V. The 288-pin Registered DIMMs use a 2Rx4 organisation and on-board ECC to meet the Supermicro H13SVW-NT memory controller requirements.
It fits administrators who need the board's maximum supported capacity with registered ECC stability. Builders using consumer UDIMMs, SODIMMs or non-ECC modules should look elsewhere because the platform requires registered DDR5.
Registered buffering offloads the memory controller so every slot remains stable at full population and rated speed. ECC corrects single-bit errors continuously, preventing silent data corruption during extended workloads.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR44800-724K4 |
| Total capacity | 512 GB (4 × 128 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL46 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 512 GB 4 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT |
Other versions of this model
The board must provide 288-pin DDR5 RDIMM slots; UDIMM or SODIMM sockets will not fit this registered form factor.
No, registered and unbuffered DDR5 cannot operate together; the memory controller requires all populated slots to use the same registered architecture.
Check the BIOS memory information screen or run a hardware inventory tool; it should report DDR5 5600 (PC5-44800) with CAS latency 46 at 1.10 V.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?