SANOXY Cat6A Shielded STP Ethernet Cable 20FT 10Gbps 500MHz 26AWG Blue
Shielded Cat6A patch cord delivers 10Gbps at 500MHz over 20FT with 26AWG copper and gold-plated RJ45 contacts for dense racks
- Supports 10Gbps data rates for high-speed networking
- 500MHz bandwidth handles demanding streaming and gaming
- Shielded STP construction reduces electromagnetic interference
- Pure copper 26AWG conductors minimise signal loss
- Gold-plated 50-micron contacts resist corrosion for stable performance
Ultra-Short 20FT Patch Cable
This 20FT Cat6A shielded STP cable is built for close-range links between patch panels, switches and side-by-side devices in dense racks. It targets installers and network administrators who need reliable 10Gbps throughput without excess slack in cabinets or wall plates.
Shielded Design for Dense Racks
Foil and braid shielding cuts electromagnetic interference and crosstalk in equipment-heavy environments. Stranded 26AWG pure copper conductors keep attenuation low while the non-booted RJ45 plugs with 50-micron gold contacts allow quick insertion and removal in tight ports.
Upgrade from Unshielded Cat6 or Cat5e
The jump is worth it when 10Gbps speeds or 500MHz bandwidth are required and cable runs stay under 20FT. It does not suit installers who need longer horizontal runs, outdoor ratings or boot-protected connectors for frequent patching in high-vibration areas.
How it compares
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 67% of the 9,945 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SANOXY Cat6A Shielded STP Patch Cable 20FT 10Gbps 500MHz 26AWG Black
SANOXY Cat6A Shielded STP Ethernet Cable 25FT 10Gbps 500MHz 26AWG Gold RJ45 Black
Questions about this item
How do I install this 20FT shielded STP cable without damaging the non-booted RJ45 connector?
Push the connector straight into the port until the tab clicks; the non-booted design has no strain-relief boot, so pulling at an angle can bend the 50-micron gold-plated contacts.
What maintenance will this Cat6A patch cord need over time?
Inspect the 26AWG pure copper conductors and gold-plated contacts periodically for dust or oxidation; wipe gently with a dry lint-free cloth if signal quality drops.
What is the first performance limit I will hit during sustained 10Gbps transfers?
The 500MHz bandwidth ceiling and 26AWG conductor gauge set the practical distance limit; beyond the rated length, attenuation and crosstalk rise before the 10Gbps signalling fails.
More in Ethernet & LAN Cables
Similar items
Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
Belkin F2CP003-07BK-LS Cat 6 network ethernet cable 7 ft
- RJ45
- RJ45
Nippon Labs 60CAT6A-6WT Cat6A network ethernet cable 6 ft white 24 AWG
- 6A
- RJ45
Nippon Labs 60CAT6A-35OR network ethernet cable 35 ft Cat6A UTP Orange
- Cat6A
- RJ45
Cables To Go 31360 Cat6 network ethernet cable 75 ft Gray
- RJ45
- RJ45
Intellinet Network Solutions Cat8.1 U/FTP Slim Ethernet Cable 10 ft Blue 10-Pack
- RJ45
- RJ45










