We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40 cm Mini SAS SFF-8087 male to four SATA female breakout cable with latch connectors and flat ribbon wire

Shenzhen Lianrui Information Technology

Shenzhen Lianrui Information Technology Mini SAS SFF-8087 to 4 SATA Cable 40CM

SKU CH-Y17D-THGEC

Connects a Mini SAS SFF-8087 host port to four SATA drives at 6 Gb/s using 30 AWG flat ribbon cable in 40 cm or 80 cm lengths

  • Connector count4
  • Product typeComponent Cables
  • Product colorBlack
  • Overall length40CM/80CM (1.31 ft/2.62 ft)
  • Design style1 SATA to 4x SATA
  • Connects one Mini-SAS SFF-8087 port to four SATA drives
  • Supports 6 Gb/s transmission for SATA I, II, III drives
  • 40 cm length fits tight chassis routing
  • 30 AWG flat ribbon cable keeps airflow clear
  • Compatible with 2.5" and 3.5" SATA hard drives

Mini SAS SFF-8087 breakout cable

The Shenzhen Lianrui Mini SAS SFF-8087 to 4 SATA cable connects a single 36-pin Mini SAS port to four 7-pin SATA drives. It is built for hardware RAID controllers or HBA cards that present SFF-8087 ports. The 40 cm flat ribbon assembly uses 30 AWG wire and supports 6 Gb/s transmission rates. Latching connectors on both ends secure the link in 24/7 operation.

Suits RAID arrays with SFF-8087 controllers

This cable fits builders expanding a hardware RAID set using 2.5" or 3.5" SATA I, II or III hard drives. It will not work for systems that only provide native motherboard SATA ports without a Mini SAS interface. Buyers needing longer reach between controller and backplane should note the 80 cm variant exists but is a separate item. Direct connection to PCIe or U.2 devices is not supported by this breakout design.

36-pin SFF-8087 male host connector

The deciding specification is the single 36-pin Mini SAS SFF-8087 male plug with latch on the host side. Your controller or backplane must present exactly this port type. The four 7-pin SATA female receptacles then attach standard SATA data cables to each drive. Without an SFF-8087 source port the cable cannot be used.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 90% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLuxshare
Model nameMini SAS SFF-8087 to 4SATA Cable
Product typeComponent Cables
Product colorBlack
Design style1 SATA to 4x SATA
Ports & slots
Connector count4
Size & build
Overall length40CM/80CM (1.31 ft/2.62 ft)

Questions about this item

What are the connector types on the Mini SAS SFF-8087 to 4 SATA cable?

The cable has one 36-pin Mini-SAS SFF-8087 male connector with a latch on the host end and four 7-pin SATA female receptacles with latches on the drive end.

How do you install the Mini SAS SFF-8087 to 4 SATA cable correctly?

Connect the single 36-pin Mini-SAS SFF-8087 male end to the motherboard or RAID controller port, then attach each of the four 7-pin SATA female ends to the drives, ensuring every latch clicks securely.

What drive sizes and SATA generations does the 40 cm Mini SAS breakout cable support?

It supports 2.5-inch and 3.5-inch drives using SATA I, II or III interfaces at up to 6 Gb/s through the 30 AWG flat ribbon cable.

More in SATA & eSATA Drive Cables

Similar items