STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one SATA power connector into two female ports using a 20 cm copper cable
This 20 cm cable converts a single SATA power connector from the supply into two female SATA power connectors, letting you add an extra SSD or hard drive without a second PSU lead. It uses 20 AWG copper conductors and carries both 5 V and 12 V rails to each device.
The splitter replaces the need for a spare SATA power plug on the power supply, so it is worth fitting when every existing connector is already occupied and you still have drive bays free. It does not increase the total wattage the supply can deliver, only the number of devices you can attach.
Verify that the male end matches the keying on your PSU SATA port and that the 20 cm reach spans the distance between the supply and both drives. Ensure the combined draw of the two drives stays within the rating of the single PSU rail you are tapping.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Chenyang |
| Model name | SA-052 |
| Product type | Power |
| Ports & slots | |
| Connector details | Sata |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
The splitter measures 20 cm end to end, so the male plug must sit within that distance of your PSU SATA port; plan device placement accordingly.
The keyed 15-pin male connector only inserts one way; the two female branches are identical, so either drive can use either branch — no extra orientation step.
20 AWG copper is rated for the typical combined draw of two SATA drives on 5 V and 12 V rails; replace the cable if insulation ever cracks or connectors loosen.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?