We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ultra-slim 25ft Cat6a Ethernet cable with transparent snagless RJ45 connectors

Cable Leader

Cable Leader 25ft Cat6a Slim Ethernet Cable 28AWG White 10 Gigabit 500MHz

SKU CH-KPHV-BFH01

A 25 ft Cat6a slim patch cable with a 4.0 mm jacket and 28 AWG conductors for 10 Gigabit 500 MHz links in dense racks

  • Cable category6A
  • First connectorRJ45
  • Second connectorRJ45
  • Conductor gauge28 AWG
  • Product typeNetwork Ethernet Cables
  • Overall length25 ft (7.62 m)

Length 25ft

Show 7 more

Color White

  • Slim 4.0mm jacket frees rack space in dense patch panels
  • 10 Gigabit 500MHz Cat6a rating handles 10GBASE-T up to 100m
  • 28AWG bare copper with 50-micron gold contacts ensures low-resistance signal integrity
  • Transparent snagless boot protects locking clip during frequent re-patching
  • Backward compatible with Cat6 and Cat5e for drop-in network upgrades

Ultra-slim Cat6a patch cable for dense racks

This 25ft Cat6a Ethernet cable uses a 4.0mm jacket and 28AWG bare copper conductors to deliver 10 Gigabit speeds at 500MHz. The white UTP design fits high-density patch panels, server racks and data centre cabinets where space and airflow are limited. Gold-plated RJ45 contacts and a snagless boot protect the locking clip during frequent re-patching.

Installers who need maximum cables per rack unit

Suited for network engineers populating patch panels, keystone jacks, PoE devices, switches, routers, servers and NAS units in tight cabinets. The slim profile eases routing and improves cooling. Not for installers who require shielded construction for noisy industrial environments or outdoor burial runs.

4.0mm overall diameter enables high-density routing

The ultra-thin jacket is the single spec that decides fit: it allows significantly more cables per rack unit than standard 6.9mm Cat6a cords while maintaining 10GBASE-T performance to 100 metres. If your cabinet cannot accept standard-diameter patch leads, this cable solves the clearance problem.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $14.99
Typical for this category: the median of 9,945 items is $14.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameGENERIC
Product typeNetwork Ethernet Cables
Product colorWhite
Connectivity
Cable category6A
Ports & slots
First connectorRJ45
Second connectorRJ45
Size & build
Overall length25 ft (7.62 m)
ShieldingNo
Conductor gauge28 AWG

Other versions of this model

5 more in the same range

Questions about this item

Does the 4.0 mm slim jacket generate any heat or power draw when the cable runs 10 Gigabit traffic all day?

No. The cable is a passive copper link with no active electronics, so it produces no heat and draws no power regardless of how long 10GBASE-T traffic runs at 500 MHz.

What equipment must I already have for this 25 ft Cat6a patch cord to work at 10 Gigabit speeds?

You need devices with RJ45 ports that support 10GBASE-T — such as 10 GbE switches, routers, servers or NAS units — plus Cat6a-rated keystone jacks or patch panels if the run terminates there.

Will this 28 AWG cable work reliably alongside the Cat6 and Cat5e cords already in my rack?

Yes. It is fully backward compatible with Cat6 and Cat5e, so it can sit in the same patch panel or switch without any configuration changes and will negotiate the highest speed both ends support.

More in Ethernet & LAN Cables

Similar items