We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row, bare chips, gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 1.1TB DDR5-5600 ECC Registered RDIMM 12x96GB CL46 2Rx4 1.1V 288-Pin memory upgrade

SKU CH-XVBJ-31Z1R

12x96GB DDR5-5600 ECC registered RDIMM kit delivers 1.1TB at CL46 for Supermicro H14SSL-NT servers

  • Total capacity1.1 TB (12 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 1.1TB 12X96GB

Show 24 more
  • Massive 1.1 TB capacity with twelve 96 GB modules
  • DDR5-5600 speed rated at PC5-44800 for high throughput
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors on the fly
  • CL46 latency at 1.10 V matches the server memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H14SSL-NT motherboard

Exact-match 1.1 TB DDR5 kit

The NEMIX RAM 1.1 TB kit delivers twelve 96 GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H14SSL-NT memory controller expects. It is for administrators who need the full 1.1 TB recognised at rated speed without manual tuning.

288-pin RDIMM population rules

Each module uses the 288-pin Registered form factor this board requires, not UDIMM or SODIMM, and the 2Rx4 organisation lets every slot run fully populated. The kit frees you from mixing capacities or ranks that would force the controller to down-clock or disable channels.

1.1 TB headroom at CL46

Twelve dual-rank modules give 1.1 TB of ECC-protected capacity for large in-memory databases, virtualization hosts or HPC workloads while the registered architecture keeps the memory controller stable. The limit is the motherboard's maximum supported capacity and its approved population order, so verify those before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $32,637.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1.1 TB (12 × 96 GB)
Higher than about 94% of the 20,941 comparable items (median 32 GB).
Price per GB $29.67 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K12
Total capacity1.1 TB (12 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.1 TB 12 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will all twelve 96 GB modules run at DDR5-5600 CL46 when every slot on my Supermicro H14SSL-NT is populated?

The kit is spec-matched to the Supermicro H14SSL-NT motherboard and uses the registered RDIMM architecture that lets every slot run fully populated at the rated 5600 MT/s speed and CL46 latency.

How much heat and power should I expect from a 1.1 TB kit running continuously at 1.10 V?

Each module operates at 1.10 V without a heat spreader, so the registered DDR5 design keeps power draw and thermals within standard server limits for all-day workloads.

Does my server need any specific firmware or BIOS revision to recognise this 12 x 96 GB registered ECC kit?

The kit is verified for the Supermicro H14SSL-NT motherboard; consult that board's manual for the approved DIMM population order and any BIOS version required before installation.

More in Model-Specific Memory Upgrades

Similar items