We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB 12x16GB DDR5 5600 ECC Registered RDIMM CL46 1.1V Supermicro H13SSL-NT memory upgrade

SKU CH-K9NY-X5N52

192GB DDR5 5600 ECC registered RDIMM kit in 12 x 16GB modules at CL46 and 1.1V, validated for Supermicro H13SSL-NT

  • Total capacity192 GB (12 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 12X16GB

Show 24 more
  • 192 GB total capacity from twelve 16 GB modules
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • Registered ECC architecture for error correction and full-slot stability
  • Verified fit for Supermicro H13SSL-NT motherboard
  • 288-pin RDIMM form factor matches board requirements

192GB DDR5 ECC RDIMM kit for Supermicro H13SSL-NT

This 12-module kit delivers 192GB of registered DDR5 memory built to the exact specifications the Supermicro H13SSL-NT motherboard requires. Each 16GB stick runs at DDR5 5600 with CL46 latency at 1.1V using a 1Rx8 layout. Registered ECC architecture ensures full-capacity stability across all populated slots.

Replaces partial or mismatched memory populations

Upgrading from a smaller kit or mixed-capacity DIMMs eliminates population-rule conflicts that can limit total capacity or force lower speeds. The jump is worth it when your workload needs every slot filled at the board's rated DDR5 5600 speed without downclocking or stability compromises.

Handles full 12-slot population at rated speed

The registered design offloads the memory controller so all twelve slots operate at DDR5 5600 with ECC error correction active. It runs out when an application demands capacity beyond 192GB or requires speeds higher than the PC5-44800 rating this board supports.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,266.99
Pricier than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (12 × 16 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $27.43 per GB
Pricier than about 76% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K12
Total capacity192 GB (12 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 12 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H13SSL-NT motherboard slots?

Yes, the kit uses the 288-pin RDIMM form factor that the H13SSL-NT requires; it is not a UDIMM or SODIMM, so the modules seat directly in the board's DDR5 DIMM slots.

What population order should I follow when installing the 12 modules on the H13SSL-NT?

Consult the motherboard manual for the approved DIMM population sequence; the board's memory-controller rules dictate which slots must be filled first to recognise all 192 GB at 5600 MT/s.

Do these registered ECC modules need any firmware updates or periodic maintenance after installation?

No firmware updates are required for the memory itself; ECC correction runs automatically, and the modules have no heat spreaders or moving parts that need servicing.

More in Model-Specific Memory Upgrades

Similar items