We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 192GB total

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 CL46 ECC Registered RDIMM for Supermicro H13SST-G memory upgrade

SKU CH-DYHW-J4X4X

A 192GB DDR5 5600 CL46 ECC registered RDIMM kit (2×96GB, 1.1V, 2Rx4) validated for the Supermicro H13SST-G motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 24 more
  • 192 GB capacity in a matched 2 × 96 GB kit
  • DDR5-5600 (PC5-44800) speed with CL46 latency
  • Registered ECC RDIMM for error correction and signal integrity
  • 1 V operation at 2Rx4 rank configuration
  • Verified compatibility with Supermicro H13SST-G motherboard

192GB DDR5-5600 ECC RDIMM kit

This 192GB kit contains two 96GB DDR5-5600 registered ECC RDIMMs built for the Supermicro H13SST-G motherboard. It targets administrators who need maximum registered capacity per slot in a validated configuration. The modules run at 1.1V with CL46 latency and a 2Rx4 organisation. Buyers who need unbuffered UDIMMs or laptop SODIMMs cannot use this product.

Registered ECC headroom at 5600 MT/s

The registered architecture buffers address and command signals so both DIMM slots can be populated at the full 192GB without reducing the 5600 MT/s data rate. ECC corrects single-bit errors on the fly to prevent silent data corruption. The kit reaches its limit when the platform's maximum supported capacity per slot or total memory ceiling is lower than 192GB.

288-pin RDIMM fit for Supermicro H13SST-G

Each module uses the 288-pin RDIMM form factor required by the H13SST-G and draws 1.1V, matching the board's native DDR5 voltage rail. No heat spreader is fitted, leaving clearance for dense server chassis airflow. The kit frees the installer from mixing ranks or speeds; it simply occupies the approved slots in the order the motherboard manual specifies.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,643.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $29.40 per GB
Pricier than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 2Rx4 registered DDR5 5600 modules work with the Supermicro H13SST-G memory controller alongside any existing RDIMMs?

The kit is spec-matched to the H13SST-G memory population rules. Install modules in the order the motherboard manual specifies for the total capacity you want.

How can I confirm the kit runs at DDR5 5600 with CL46 and ECC active after installation?

Enter the BIOS and verify the memory speed reads 5600 MT/s, CAS latency 46, voltage 1.10 V and that ECC is reported as enabled for each DIMM.

Does the 192 GB kit include only the two 96 GB RDIMMs or are heat spreaders or cables also supplied?

The package contains the two 96 GB DDR5 5600 CL46 288-pin ECC registered RDIMMs only; no heat spreaders or extra cables are included.

More in Model-Specific Memory Upgrades

Similar items