We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5-5600 CL46 ECC RDIMM Supermicro H14SSL-N

SKU CH-M95K-GZNP6

256 GB registered ECC DDR5 kit in four 64 GB modules running at 5600 MT/s CL46 for the Supermicro H14SSL-N motherboard

  • Total capacity256 GB (4 × 64 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 256 GB total capacity from four 64 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation at 2Rx4 rank aligns with Supermicro H14SSL-N requirements
  • 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects

256GB DDR5-5600 ECC RDIMM Kit

This 256GB kit contains four 64GB DDR5-5600 modules built to the PC5-44800 standard. Each stick is a 288-pin Registered DIMM with ECC, 2Rx4 organisation, CL46 latency and 1.10V operation. The memory is validated for the Supermicro H14SSL-N motherboard so the controller recognises the full capacity at rated speed.

Who this suits and who it does not

Ideal for administrators expanding a Supermicro H14SSL-N platform to its maximum supported memory with registered ECC modules. Not suitable for systems that require unbuffered UDIMMs, SODIMM form factors, non-ECC memory or a different DDR generation.

The spec that decides fit

The motherboard must accept 288-pin DDR5 RDIMMs with 2Rx4 ranking, 1.10V voltage and CL46 timing at 5600 MT/s; otherwise the kit will not post or will run at reduced capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $8,236.99
Pricier than about 85% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (4 × 64 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $32.18 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-924K4
Total capacity256 GB (4 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items256 GB 4 × 64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Do I need a Supermicro H14SSL-N motherboard with available 288-pin RDIMM slots to install this 256GB kit?

Yes, this 4x64GB DDR5-5600 CL46 registered ECC kit is built for the Supermicro H14SSL-N and requires four empty 288-pin RDIMM slots running at 1.10V.

Will the memory controller on my H14SSL-N run all four 2Rx4 modules at the rated 5600 MT/s?

The kit matches the board's specified rank, voltage and timing so the controller recognises the full 256GB at DDR5-5600 (PC5-44800) without downclocking.

How can I confirm the system sees all 256GB at CL46 after installation?

Enter the BIOS or use a hardware inventory tool; it should report 256GB total, DDR5-5600 speed, CL46 latency and ECC registered status for each DIMM.

More in Model-Specific Memory Upgrades

Similar items