We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (2×32GB) DDR5-5600 ECC RDIMM CL46 1.1V 2Rx8 288-pin Supermicro H13SST-GC memory upgrade

SKU CH-C3KF-VDXT5

A 64 GB DDR5-5600 ECC registered DIMM kit validated for the Supermicro H13SST-GC motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 64 GB capacity across two 32 GB modules for maximum supported density
  • DDR5-5600 speed with CL46 latency matching the motherboard's rated timing
  • 1 V operation reduces power draw while maintaining registered ECC stability
  • 2Rx8 registered ECC design corrects single-bit errors under full population
  • 288-pin RDIMM form factor verified for Supermicro H13SST-GC motherboard

Exact-match upgrade kit

This 64GB kit contains two 32GB DDR5-5600 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SST-GC memory controller expects. The modules are recognised at full capacity and run at their rated speed without manual tuning.

Registered ECC stability

Registered architecture offloads the memory controller so every slot operates fully populated at full capacity, while ECC catches and corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. Builders who need unbuffered UDIMMs or non-ECC modules cannot use this kit.

DDR5-5600 interface limits

The DDR5 interface tops out at 5600 MT/s with CL46 latency at 1.1V, so bandwidth and response time are fixed by the standard and the motherboard's memory controller. Systems that require higher data rates, lower latency or a different voltage must use a platform that supports faster DDR5 specifications.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,874.99
Pricier than about 67% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $29.30 per GB
Pricier than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 2Rx8 registered ECC modules need any firmware updates or periodic reseating to stay stable in the Supermicro H13SST-GC?

The modules are an exact-match DDR5-5600 kit with 1.10 V, CL46 timings and registered ECC; no firmware updates or scheduled reseating are required once they are seated in the approved DIMM slots.

What thermal or power ceiling appears first when the 64 GB kit runs at DDR5-5600 continuously?

Each DIMM operates at the standard 1.10 V DDR5 voltage with no heat spreader, so the platform's memory-controller thermal limit will be reached before the modules exceed their rated power envelope.

How much fan noise or extra heat should I expect from the two 32 GB RDIMMs during all-day operation?

The registered ECC DDR5-5600 modules draw only 1.10 V and have no onboard heat spreader, so they add minimal heat and require no additional cooling beyond the server's standard airflow.

More in Model-Specific Memory Upgrades

Similar items