We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600 ECC Registered RDIMM CL46 1.1V Supermicro H13SSW

SKU CH-EQ7V-TNJ1R

A 64 GB kit of four 16 GB DDR5-5600 registered ECC RDIMMs at 1.1 V CL46, validated for the Supermicro H13SSW motherboard

  • Total capacity64 GB (4 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 64GB 4X16GB

Show 24 more
  • 64 GB capacity from four 16 GB modules for full server utilisation
  • DDR5 5600 speed with CL46 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the Supermicro H13SSW memory controller specification
  • 288-pin RDIMM form factor fits the board's required slot type

Exact-match DDR5-5600 kit for Supermicro H13SSW

This 64 GB kit contains four 16 GB DDR5-5600 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSW memory controller expects. The modules are 1Rx8, run at 1.1 V with CL46 latency and use the 288-pin RDIMM form factor required by this server board.

Verify motherboard population rules before ordering

Server memory support varies by model and BIOS revision. Consult the Supermicro H13SSW manual for supported capacities, approved DIMM population order and installation steps to ensure the kit is recognised at full capacity and rated speed.

Registered ECC design runs cool

The registered architecture offloads the memory controller so every slot operates fully populated while ECC corrects single-bit errors on the fly. Low 1.1 V operation and the absence of a heat spreader keep thermals and power draw modest in normal server workloads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,721.99
Pricier than about 66% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (4 × 16 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $26.91 per GB
Pricier than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K4
Total capacity64 GB (4 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 4 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What comes in the 64GB kit and do I need anything else to install it?

The kit contains four 16GB DDR5 5600 CL46 1.10V 288-pin ECC Registered RDIMMs. No extra parts are required; install them into the Supermicro H13SSW DIMM slots following the board's population order.

Should I choose the 4x16GB kit or a different capacity for the H13SSW?

This 4x16GB kit provides 64GB total and matches the H13SSW's Registered RDIMM requirement. Choose it when your workload needs that capacity and the board's manual confirms four-module population.

What does DDR5 5600 (PC5-44800) CL46 mean once the modules are running in the server?

The modules operate at 5600 MT/s with a CAS latency of 46 cycles at 1.10V. The Registered design and ECC let all four slots run fully populated at that rated speed while correcting single-bit errors.

More in Model-Specific Memory Upgrades

Similar items