We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 768GB (8×96GB) DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro H13SST-G

SKU CH-7X0F-KB007

Eight 96 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMMs totalling 768 GB at 1.1 V, validated for the Supermicro H13SST-G motherboard

  • Total capacity768 GB (8 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 768GB 8X96GB

Show 24 more
  • 768 GB total capacity from eight 96 GB modules enables large-scale workloads
  • DDR5 5600 MT/s speed delivers high memory bandwidth for demanding applications
  • CL46 CAS latency provides responsive timing for registered server memory
  • 1 V operating voltage reduces power draw across fully populated slots
  • ECC and registered design corrects single-bit errors and stabilises every channel

Exact-match 768GB DDR5 kit for Supermicro H13SST-G

This 768GB kit contains eight 96GB DDR5 5600 RDIMMs built to the precise rank, voltage and timing the Supermicro H13SST-G memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed. The modules install as a matched set for immediate recognition at full capacity.

Sustained-load behaviour with registered ECC

Registered buffering keeps electrical loading low across all eight slots, allowing the memory controller to maintain DDR5 5600 throughput during extended workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption that would otherwise force unplanned reboots. CL46 latency and 1.10V operation remain stable when the system runs continuously at full population.

Thermals noise and power at 1.10V

The modules operate at 1.10V without heat spreaders, relying on server chassis airflow for cooling. Power draw stays proportional to the low-voltage DDR5 specification across all eight DIMMs. No moving parts means zero acoustic contribution; thermal performance depends entirely on the host system's cooling design.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $20,637.99
Pricier than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 768 GB (8 × 96 GB)
Higher than about 92% of the 20,941 comparable items (median 32 GB).
Price per GB $26.87 per GB
Pricier than about 74% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K8
Total capacity768 GB (8 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items768 GB 8 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 1.1V DDR5 5600 kit draw when all eight 96GB modules run continuously?

Each module operates at 1.1V DDR5 standard voltage; total system power depends on the Supermicro H13SST-G memory controller and workload, not on the kit alone.

Does the Supermicro H13SST-G require any specific BIOS version or CPU stepping to recognise the 2Rx4 registered ECC layout?

The kit is validated for the H13SST-G motherboard; consult the board manual for approved DIMM population order and any firmware updates before installation.

Can I mix these 96GB RDIMMs with smaller DDR5 ECC modules already installed in the same server?

Mixing capacities or ranks is not recommended; the H13SST-G memory population rules should be followed for stable operation at full 5600 speed.

More in Model-Specific Memory Upgrades

Similar items