We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM memory module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM memory upgrade

SKU CH-TG77-FE9WA

96 GB DDR5 RDIMM running at 5600 MT/s with CL46 latency, 2Rx4 registered ECC at 1.1 V for Supermicro H13SST-GC

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 24 more
  • 96 GB capacity supports memory-intensive server workloads
  • DDR5 5600 speed delivers high data throughput for demanding applications
  • CL46 latency with 1.1 V operation balances responsiveness and power efficiency
  • Registered ECC 2Rx4 architecture enables full-slot population and real-time error correction
  • 288-pin RDIMM form factor matches Supermicro H13SST-GC motherboard requirements

Exact-fit server upgrade

This 96GB DDR5 registered ECC RDIMM is built for the Supermicro H13SST-GC motherboard. It delivers the precise rank, voltage and timing the board's memory controller expects so the full capacity is recognised at rated speed. The 288-pin registered form factor matches the slot requirement; UDIMM or SODIMM modules will not fit. It is intended for administrators who need guaranteed compatibility with this specific platform.

Build integration

The registered architecture offloads the memory controller, allowing every supported slot to run fully populated at full capacity without signal degradation. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots in production workloads. No heat spreader is fitted, so airflow across the modules must be provided by the chassis. Verify your system manual for approved DIMM population order and maximum supported capacity before installation.

Sustained-load behaviour

Operating at 1.1V with CL46 latency at 5600 MT/s, the modules maintain their rated parameters continuously under load. Registered buffering keeps electrical loading stable when all channels are filled, avoiding the timing drift that can appear with unbuffered designs at high density. ECC correction runs transparently during extended compute tasks, preserving data integrity without performance penalty. The 2Rx4 organisation supports dense population while keeping per-rank electrical load within the controller's sustained specification.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,821.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $29.40 per GB
Pricier than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 96GB DDR5 5600 CL46 kit run at its rated speed when all Supermicro H13SST-GC slots are populated?

Yes, the registered RDIMM architecture offloads the memory controller so every slot runs fully populated at the rated 5600 speed without downclocking.

Does this 96GB DDR5 RDIMM produce extra heat or fan noise during continuous server workloads?

The modules operate at 1.1V with no heat spreader and rely on the server chassis airflow; registered buffering keeps power draw stable during all-day loads.

Must the Supermicro H13SST-GC motherboard already support 2Rx4 registered ECC DDR5 to use this 96GB kit?

Yes, the board must accept 288-pin DDR5 RDIMMs with 2Rx4 organisation and ECC; verify the manual for supported capacities and population order before purchase.

More in Model-Specific Memory Upgrades

Similar items