We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB (2x128GB) CL46 1.1V Supermicro H13SSL-NT

SKU CH-4DEJ-9QBCC

A 256 GB DDR5 5600 registered ECC kit with 1.1 V CL46 timing, built for the Supermicro H13SSL-NT motherboard

  • Total capacity256 GB (2 × 128 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 256 GB total capacity from two 128 GB modules enables maximum memory density
  • DDR5 5600 speed rated at PC5-44800 delivers high bandwidth for server workloads
  • Registered ECC architecture corrects single-bit errors on the fly to prevent data corruption
  • CL46 latency at 1.1 V provides stable timing at standard DDR5 voltage
  • 288-pin RDIMM form factor matches Supermicro H13SSL-NT motherboard requirements exactly

Exact-match DDR5-5600 kit for Supermicro H13SSL-NT

This 256 GB kit delivers two 128 GB DDR5 registered ECC RDIMMs rated at 5600 MT/s with CL46 timing and 1.10 V operation. It is built for administrators who need the full 256 GB capacity recognised at rated speed on the Supermicro H13SSL-NT motherboard.

288-pin registered form factor

Each module uses the 288-pin RDIMM form factor that the board requires, not UDIMM or SODIMM. Registered buffering offloads the memory controller so every slot runs fully populated, while on-die ECC corrects single-bit errors before they reach production workloads.

CL46 latency at DDR5-5600

The CAS latency of 46 cycles at 5600 MT/s is the timing the platform expects for stable operation at full capacity. Buyers whose systems demand a different latency or voltage should verify their motherboard manual before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $8,368.99
Pricier than about 85% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (2 × 128 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $32.69 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-724K2
Total capacity256 GB (2 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items256 GB 2 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does the DDR5 5600 PC5-44800 interface cap at in real use?

The kit runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.1 V, so the memory controller will recognise the full 256 GB at that rated speed.

What physical slot and form factor does this 288-pin RDIMM kit need?

Each 128 GB module is a 288-pin DDR5 RDIMM; the board must accept registered DIMMs, not UDIMM or SODIMM.

How do I install the two 128 GB sticks on the Supermicro H13SSL-NT, and which step is often missed?

Follow the motherboard manual for approved population order and install both RDIMMs in the specified slots; the step most often missed is verifying the exact slot sequence for full-capacity operation.

More in Model-Specific Memory Upgrades

Similar items