We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 288GB (6x48GB) CL46 1.1V Supermicro H13SSL-NT memory upgrade

SKU CH-ANWZ-10G35

A 288 GB DDR5 server kit with six 48 GB registered ECC modules rated at 5600 MHz, CL46 and 1.1 V, validated for the Supermicro H13SSL-NT motherboard

  • Total capacity288 GB (6 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 288GB 6X48GB

Show 24 more
  • 288 GB total capacity from six 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on the Supermicro H13SSL-NT
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation meets the board's voltage spec for stable full-population loads
  • 2Rx8 dual-rank organisation matches the motherboard's population rules for full recognition

Exact-match server upgrade

This 288GB kit contains six 48GB DDR5 RDIMMs built for the Supermicro H13SSL-NT motherboard. Each module runs at 5600 speed with CL46 timing at 1.1V. The registered ECC design matches the board's required rank and voltage so the system recognises full capacity immediately.

DDR5 bandwidth and latency

The PC5-44800 standard delivers 5600 MT/s transfer rates with a fixed CAS latency of 46 cycles. Registered buffering adds one cycle of command delay but allows all slots to operate at full speed. ECC correction handles single-bit errors without software intervention.

Enterprise build for dense population

Major OEM Samsung, Micron or Hynix chips sit on bare green PCBs without heat spreaders, keeping module height low for tight server chassis. The 288-pin RDIMM keying prevents mis-installation in UDIMM or SODIMM slots. Six modules fill the board's validated population sequence for maximum density.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,470.99
Pricier than about 82% of the 21,161 comparable items (median $397.99).
Total capacity 288 GB (6 × 48 GB)
Higher than about 81% of the 20,941 comparable items (median 32 GB).
Price per GB $22.47 per GB
Pricier than about 67% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K6
Total capacity288 GB (6 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items288 GB 6 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the 6 x 48 GB kit or a different capacity for my Supermicro H13SSL-NT?

The kit provides exactly 288 GB as six 48 GB modules, matching the board's DDR5 RDIMM slot count and population rules for full-capacity operation.

What does DDR5-5600 (PC5-44800) actually deliver once installed in the server?

The modules run at 5600 MT/s with CL46 latency at 1.1 V, giving the memory controller the exact timing and voltage it expects for stable, rated-speed performance.

How does the 288-pin RDIMM interface and registered ECC design affect my system?

The registered buffer reduces electrical load on the controller so all slots can run fully populated, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

More in Model-Specific Memory Upgrades

Similar items