We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1.5TB 12x128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V CL46 288-Pin ECC RDIMM Kit Supermicro H13SSW

SKU CH-RBYA-DBRNC

A 1.5 TB DDR5 ECC registered memory kit with twelve 128 GB modules running at 5600 MHz, CL46 and 1.1 V, validated for the Supermicro H13SSW motherboard

  • Total capacity1.5 TB (12 × 128 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 5 TB total capacity from twelve 128 GB modules
  • DDR5 5600 speed with CL46 latency at 1.1 V
  • Registered ECC RDIMM design for full-slot stability
  • Exact-match kit verified for Supermicro H13SSW motherboard
  • Built with major OEM Samsung Micron or Hynix chips

1.5 TB DDR5 ECC RDIMM kit for Supermicro H13SSW

This 1.5 TB kit contains twelve 128 GB DDR5-5600 registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSW memory controller expects. It installs as a matched set so the board recognises full capacity at rated speed without manual tuning.

Who this suits and who should look elsewhere

Server administrators who need maximum registered ECC capacity on a Supermicro H13SSW platform will find the 2Rx4 organisation and 1.1 V operation match the board's population rules. Builders using consumer motherboards, laptops or any system that requires unbuffered UDIMM or SODIMM modules cannot use this registered kit.

The specification that decides fit

The kit is a 288-pin DDR5 RDIMM running at 5600 MT/s with CL46 latency, 1.1 V and 2Rx4 registered ECC architecture; if your motherboard calls for a different form factor, voltage, rank structure or speed grade this memory will not be compatible.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $54,067.99
Pricier than about 97% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (12 × 128 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $36.05 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-724K12
Total capacity1.5 TB (12 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 12 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How can I verify the 1.5TB kit is running at the rated 5600MHz CL46 after installation?

Enter the BIOS or UEFI on the Supermicro H13SSW and confirm the memory frequency shows 5600 MT/s with CL46 timings; the registered ECC modules should also report 1.1V and 2Rx4 organization.

What does the package contain and is anything else required to use the kit?

The box includes twelve 128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V CL46 288-pin ECC RDIMM modules; no additional parts are needed for a supported Supermicro H13SSW configuration.

Which capacity or version of this NEMIX RAM kit should I choose for the Supermicro H13SSW?

This specific kit is a single 1.5TB configuration (12 x 128GB) validated for the H13SSW; select it when your server requires the full 12-DIMM population at DDR5-5600 registered ECC.

More in Model-Specific Memory Upgrades

Similar items