We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC Registered RDIMM Supermicro H13SST-G memory upgrade

SKU CH-HS7J-KWMAE

96 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMM validated for the Supermicro H13SST-G motherboard

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 24 more
  • Exact DDR5-5600 CL46 2Rx4 spec ensures full-speed operation on Supermicro H13SST-G
  • Registered ECC RDIMM architecture prevents silent data corruption under heavy server loads
  • 96 GB single-module capacity maximises memory density per DIMM slot
  • 10 V DDR5 voltage reduces power draw while maintaining 5600 MT/s throughput
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability and signal integrity

Exact-match DDR5-5600 server upgrade

This 96GB DDR5 5600 (PC5-44800) Registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro H13SST-G motherboard expects. The 2Rx4 organisation and 1.1V operation let the memory controller recognise full capacity at rated speed without manual tuning. It is not suited for systems that require unbuffered UDIMMs or SODIMM form factors.

Thermals, noise and power draw

Operating at 1.1V, the modules draw minimal power and produce little heat in normal server workloads. With no heat spreader fitted, airflow across the bare PCB is sufficient for typical rack densities. Registered buffering reduces electrical load on the memory controller, contributing to stable operation across all populated slots.

What the kit changes

The single 96GB RDIMM adds maximum capacity in one slot, leaving remaining DIMM sockets free for future expansion under the board's population rules. On-board ECC corrects single-bit errors automatically, preventing silent data corruption and unplanned reboots in production environments. Lifetime replacement coverage and US-based technical support back the installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,607.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $27.17 per GB
Pricier than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 288-pin DDR5 RDIMM in the Supermicro H13SST-G, and what step is commonly missed?

Power down the server, open the chassis, and insert the module into the DIMM slot following the motherboard manual's population order; the step most often missed is confirming the correct slot sequence for 2Rx4 registered DIMMs so the controller detects the full 96 GB at 5600 MT/s.

What maintenance or replacement will this 96 GB DDR5 5600 CL46 kit need over its service life?

No scheduled maintenance is required; the module has no heat spreader and operates at 1.1 V, so only replace it if a DIMM fails ECC correction or the server's memory configuration changes.

What limit appears first when the RDIMM runs sustained workloads at 5600 MT/s?

The registered buffer and ECC logic keep signal integrity at the rated 5600 MT/s CL46 timing, so the first practical limit is the motherboard's maximum supported capacity per slot rather than the module's own speed rating.

More in Model-Specific Memory Upgrades

Similar items